Auroch Minerals set to drill high priority nickel target
Published 06-MAY-2021 10:16 A.M.
3 minute read
Hey! Looks like you have stumbled on the section of our website where we have archived articles from our old business model.
In 2019 the original founding team returned to run Next Investors, we changed our business model to only write about stocks we carefully research and are invested in for the long term.
The below articles were written under our previous business model. We have kept these articles online here for your reference.
Our new mission is to build a high performing ASX micro cap investment portfolio and share our research, analysis and investment strategy with our readers.
Click Here to View Latest Articles
Auroch Minerals’ (ASX: AOU) high-powered ground MLEM survey initiated last week, has successfully identified a significant conductor at the Nepean Nickel Project.
AOU has three nickel projects in Western Australia, one of the world’s richest regions for nickel sulphide: Nepean, Leinster and Saints.
It is the Nepean project which is currently the company’s primary focus.
The Nepean Nickel Project contains the historic high-grade Nepean nickel sulphide mine.
Nepean was the second producing nickel mine in Australia, producing just over 1.1 million tonnes of ore between 1970 and 1987.
The Nepean nickel mine has a remnant high-grade JORC (2004)-compliant resource: 13,250t contained nickel @ 2.20% Ni. (It should be noted that the resource is JORC (2004) only (i.e. historic estimate) and not compliant with the JORC (2012) code required now.)
AOU sees high potential to build on the existing remnant resources with drill targets along strike and at depth.
Today’s news gives AOU a quality high-potential drill target. This discrete bedrock conductor is only approximately 1 km south of the historic high-grade Nepean nickel mine.
“The effectiveness of the ground MLEM survey in detecting such a quality high-potential drill target so early in the survey has exceeded all expectations,” Auroch Managing Director Aidan Platel said.
“Given the lack of historical drilling along the 10km of potential strike from the high-grade Nepean nickel mine, we have always believed that the systematic application of modern geophysical and exploration techniques would have great potential to lead to significant new nickel sulphide discoveries.
“As such, the identified EM conductor is a compelling drill target for us and will be tested immediately with a diamond drill programme. Parallel to this, the MLEM survey will continue as scheduled over the critical areas of the Nepean strike, and will be completed within the next fortnight. We look forward to seeing what other conductive bodies it may uncover.”
Details of the survey
As stated, the MLEM survey initiated last week has successfully identified a significant conductor at the Nepean Nickel Project.
The conductor has been modelled at 250m below the surface, about 1km to the south of the historic high-grade Nepean nickel mine. The moderate-high strength of the modelled conductor is in the range of 4,000 - 8,000S which is typical of conductive bodies such as semi-massive and massive sulphide mineralisation.
In other words, it represents a high priority drill target.
The modelled conductor is located in an area that has been poorly tested by drilling at depth; however, a historic drill-hole (ND051) 50m to the north intercepted disseminated nickel sulphides within an ultramafic unit, which adds further support to the potential that the conductive plate may represent significant nickel sulphide mineralisation.
Auroch will immediately test this high-potential target with diamond drilling, commencing with a 350 - 400m drill-hole designed to intercept the modelled conductive plate at a down-hole depth of ~290 - 300m.
The hole will be drilled to approximately 50m past the basal footwall contact with the underlying basalt unit, in order to provide an adequate depth for follow-up down-hole EM (DHEM) surveys to test for extensions and/or additional conductive bodies at depth.
What’s next for AOU
AOU will be busy over the next four to six weeks, leading to further newsflow.
On the agenda is:
- High-powered ground MLEM survey to test critical areas of the 10km of prospective strike of the Nepean ultramafics – underway
- Diamond drill programme testing high-priority EM targets – underway
- Second phase of RC drilling to test geochemical and geophysical targets along the Nepean strike – commencing late May – June
- Diamond drill programme at the Woodwind and Percussion Prospects of the Leinster Nickel Project – underway
- DHEM surveys of completed diamond drill-holes at Woodwind & Percussion in Leinster – underway
- RC drill programme at the Woodwind, String, Brass and Firefly Prospects of the Leinster Nickel Project – commencing mid-May.
General Information Only
S3 Consortium Pty Ltd (S3, ‘we’, ‘us’, ‘our’) (CAR No. 433913) is a corporate authorised representative of LeMessurier Securities Pty Ltd (AFSL No. 296877). The information contained in this article is general information and is for informational purposes only. Any advice is general advice only. Any advice contained in this article does not constitute personal advice and S3 has not taken into consideration your personal objectives, financial situation or needs. Please seek your own independent professional advice before making any financial investment decision. Those persons acting upon information contained in this article do so entirely at their own risk.
Conflicts of Interest Notice
S3 and its associated entities may hold investments in companies featured in its articles, including through being paid in the securities of the companies we provide commentary on. We disclose the securities held in relation to a particular company that we provide commentary on. Refer to our Disclosure Policy for information on our self-imposed trading blackouts, hold conditions and de-risking (sell conditions) which seek to mitigate against any potential conflicts of interest.
Publication Notice and Disclaimer
The information contained in this article is current as at the publication date. At the time of publishing, the information contained in this article is based on sources which are available in the public domain that we consider to be reliable, and our own analysis of those sources. The views of the author may not reflect the views of the AFSL holder. Any decision by you to purchase securities in the companies featured in this article should be done so after you have sought your own independent professional advice regarding this information and made your own inquiries as to the validity of any information in this article.
Any forward-looking statements contained in this article are not guarantees or predictions of future performance, and involve known and unknown risks, uncertainties and other factors, many of which are beyond our control, and which may cause actual results or performance of companies featured to differ materially from those expressed in the statements contained in this article. S3 cannot and does not give any assurance that the results or performance expressed or implied by any forward-looking statements contained in this article will actually occur and readers are cautioned not to put undue reliance on forward-looking statements.
This article may include references to our past investing performance. Past performance is not a reliable indicator of our future investing performance.